Gateway » T Series » T-1604m

Gateway » T Series » T-1604m LCD Screen Replacement Guide

How to Remove Replace Install your Gateway T Series T-1604m Laptop LCD Screen

1. Remove the rubber covers from you Gateway T-1604m LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway T-1604m Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway T-1604m LCD hinges with care as they are delicate.

6. Place the Gateway T-1604m LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway T-1604m Inverter from the LCD.

8. You are now ready to replace and install your new Gateway T-1604m LCD Screen.

9. Recconnect back your Gateway T-1604m Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.